Model Number: RSAW ESB 70/ZA.
Brand Name: Resun-Auway
Key Specifications/Special Features:
RSAW ESB70/ZA is a high active toiletry grade of lauryl ether sulphate made by continuous SO3sulphation of an ethoxylated narrow cut, fatty alcohol followed by neutralization with caustic soda.CAS No.:68585-34-2Chemical formula:CH3-(CH2)n-(O-CH2-CH2)p-OSO3Na, n=9-15 p=2Molecular mass:376.48Applications:
Storage:
Dilution:
- RSAW ESB70/ZA is a versatile toiletry raw material extensively used in the formulation of shampoos, foam bath preparation, other toiletry and cleaning products
- RSAW ESB70/ZA is especially useful in high active formulations by virtue of its excellent solubility characteristics and mildness to the skin
- RSAW ESB70/ZA is a sensitive to changes in temperature and PH, Decomposition can occur at temperatures above 40°C or in acidic conditions (PH below 5)
- Decomposition is caused by hydrolysis and decomposed product, being acid, will catalyze further hydrolysis
- Material store at a temperature below its set point will require re-heating with consequent danger of over-heating and decomposition especially close to the source of heating
- Such extreme conditions of storage, handling and use should be avoided
- RSAW ESB70/ZA contains small amount of citric acid, at the normal PH of product will act as PH buffer and therefore counteract hydrosis
- Care should be taken in the dilution of RSAW ESB70/ZA
- The method of dilution should always be add the RSAW ESB70/ZA tothe water and not the reverse, otherwise an extremely viscous product will result
- Our technical department is available to discuss and give the guidance on any particular aspect of the use of this product
| Features | |
| Physical properties | |
| Color | White or light yellow |
| Appearance at 25℃ | Pourable viscous liquid |
| Freezing point | 10℃ |
| Chemical properties | |
| Specifications: | |
| Active matter | 70.0±2.0% |
| Unsulphated matter | 3.5% Max |
| 1,4-Dioxane | 50ppm Max |
| PH Value (2% aqueous solution) | 7.0-9.0 |
| Sodium sulfate | 1.5% Max |
| Chloride Ion | 0.3%Max |
| Typical analysis | |
| Active substance | 70.0% |
| Unsulphated matter | 2.0% |
| Chloride Ion | 0.1% |
| Sodium sulfate | 1.0% |
| PH Value (2% aqueous solution) | 8.5 |
Shipping Information:
- FOB Port: Guangzhou
- Lead Time: 7 - 10 days
Main Export Markets:
- Asia
- Central/South America
- Mid East/Africa
- North America


